> Which ECU is Right for me? > Nissan > Pulsar SR20

Pulsar SR20

For your car, we recommend the following product:

240SX / Pulsar Select Plug-in ECU

240sx Pulsar Select Plug-in ECU
  • Built in MAP sensor to eliminate airflow meter
  • Easy upgrade to turbo operation if required with
  • Designed for single coil / distributor operation
  • VE tuning to simplify injector upgrades
  • Easy to use software
  • Plugs into factory wiring
  • Compatible with many third party dashes and devices
  • Full closed loop operation
  • Boost control (on GTI-R)
  • Flex fuel capable
  • Fully sequential injection, individual cylinder fuel control
  • Tuning set up for single throttle or quad throttle / ITB (GTI-R)
  • VVL control for SR20VE engine
[Learn more...]

 

Notes:
We recommend adding an air temperature sensor on the pipe just before the throttle body. From factory the cars are tuned conservatively; when you start modifying for performance, the extra sensor helps with tuning and monitoring. We recommend adding a wideband lambda sensor to the engine. This connects directly to the ECU and assists greatly with tuning. If you intend to run boost by gear with an aftermarket turbo, we recommend upgrading the factory boost control solenoid to a 3 port MAC valve.